Comparison of different materials Drawing Die
Main comparison-advantages-disadvantages-scope of application
1. Alloy steel mold-easy to make-poor wear resistance, short life-basically eliminated
2. Natural diamond-high hardness, good abrasion resistance-large brittleness, difficult to process-wire die below 1.2mm in diameter
3. Cemented Carbide-Good polishing, low energy consumption-Poor abrasion resistance, difficult processing-Various diameter wires
4. Polycrystalline diamond-high hardness, good wear resistance-difficult to process, high cost-small wire, wire
5.CVD coating material-high finish, good temperature resistance-complex process, difficult to process-small wire, wire
6. Ceramic materials-wear-resistant, high temperature resistance, good corrosion resistance-thermal shock, poor toughness, difficult to process-no large-scale application
In the drawing process of small wire and wire, natural diamond, polycrystalline diamond and CVD coating die are common drawing die materials. When drawing small diameter wires, CVD-coated diamond molds overcome the anisotropy of natural diamond molds, and at the same time have excellent strength and hardness, with the highest drawing yield and surface quality. The test proves that the life of the CVD-coated diamond wire drawing die is equivalent to that of a natural diamond die, the product has a high qualification rate, and the surface quality is better than domestic polycrystalline diamond. Therefore, for small diameter wire drawing, CVD coated diamond wire drawing die is an ideal choice. Although the wire drawing die can be used to process various steels, copper, tungsten, molybdenum and other metal and alloy materials, the wire drawing dies of different materials have their applicable processing scopes. The drawing patterns and use of the wire drawing dies of different materials when processing the same wire There is a large difference in life, so the reasonable choice of wire drawing die material is the key to successful application.
The drawing dies of different materials have their relative reasonable processing objects. The rationality of the drawing process mainly refers to the matching of the mechanical, physical and chemical properties of both the drawing die and the wire to obtain the longest mold life. For example, when drawing copper wires of the same diameter, the service life of polycrystalline diamond dies is 300 to 500 times that of hard alloy dies, and only 80 to 100 times when drawing nickel wires. The service life is only 50 to 80 times that of the carbide mold, and the life of the polycrystalline diamond mold is only 20 to 60 times that of the carbide mold when carbon steel is drawn. Due to the lack of systematic research on the matching theory of drawing die and wire in China, blind selection has been caused and resource waste has been caused. The friction and wear of wire drawing dies is very complicated, and they are generally divided into two categories: failure and friction and wear. The damage of the wire drawing die can be divided into ring failure, tensile failure, shear failure and support surface failure, etc. Friction and wear can be divided into abrasion wear, friction wear, corrosion wear, abrasion and wear caused by fine particles. The different working conditions (wire material, drawing die material, lubricant, etc.) make the drawing die wear and damage have their own unique processes.
The interrelationship between the wear and tear of the drawing die is essentially interrelated. The situation inside the drawing die may be very subtle, some factors may play a role at the same time, and their superimposed effect is very complicated and difficult to understand. It is possible that the effect of one factor will conceal the effect of other factors. The above-mentioned several forms of failure and friction and wear may often be intertwined, which makes it more difficult to analyze the damage and wear mechanism of the drawing die. But in general, the order of the wear resistance of wire drawing dies of various materials from high to low is: diamond wire drawing dies (without considering the anisotropy of natural diamond)-ceramic wire drawing dies-hard alloy dies- Obsolete alloy steel mold.
上一篇：Drawing Die material classification 下一篇：China Factory price in diamond dies
